| Windows NT 4.0 Configuration |
|
| 1. Click on the Start Button >> Programs >> Accessories >> Dial-Up Networking. >> You should see the following box: |
| |
 |
| |
2. Click on New >> You should see the following box:
- Click on the Basic tab.
- In the Entry name: field replace DandyNet
- In the Phone number: Local Access Numbers
- In Dial using: select the modem you are using.
|
| |
 |
| |
|
3. Click on the Server tab >> You should see the following box:
- Ensure that TCP/IP is checked.
- Make sure that IPX/SPX and NetBEUI are NOT checked.
- Uncheck Enable PPP LCP extensions.
|
| |
 |
| |
|
4. Click on the TCP/IP Settings button. >> You should see the following box:
- Make sure that Server assigned IP address is selected.
- Select Specify name server addresses and enter 209.128.224.2 in the Primary DNS field. Enter 209.128.232.2 in the Secondary DNS field.
- Make sure that Use IP header compression and Use default gateway on remote network are both checked.
|
| |
 |
| |
|
5. Click OK and then click on the Script tab >> You should see the following box:
- After dialing (login) should be set to None.
|
| |
 |
| |
|
6. Click on the Before dialing button >> You should see the following box:
- This should also be set to None
|
| |
|
| |
|
7. Click OK and then click on the Security tab. >> You should see the following box:
- Ensure that Authentication and encryption policy is set to Accept any authentication including clear text.
|
| |
|
| |
|
8. Click OK. You will return to the first screen with the new phonebook entry.
|
|
|
|
|
9. To connect, click on the Dial button. The following screen should appear:
Enter your username and password in lower case letters in the appropriate boxes.
Leave Domain blank. >> Click OK to start dialing |
|
 |
| |
